Fire Damage Restoration in Fort McMurray, Alberta
Fire damage in Fort McMurray means wildfire from the surrounding boreal forest, house and kitchen fires in a long heating season, and the smoke and ash that travel well beyond the flames. 911 Restoration of Fort McMurray responds around the clock in Downtown / Lower Townsite, Waterways, Abasand, Beacon Hill, Thickwood, Timberlea, Eagle Ridge, Stone Creek, Parsons Creek, Dickinsfield, Gregoire, and the Wood Buffalo neighbourhood.
Quick answer: 911 Restoration of Fort McMurray provides 24/7 fire damage restoration across Fort McMurray, including Abasand, Beacon Hill, Timberlea, Thickwood and Dickinsfield: board-up, soot and smoke cleaning, odour removal, contents cleaning, and repairs, with a typical 45-minute arrival and Direct Insurance Coordination. Call (780) 762-0212 for immediate help.
What Makes Fire Damage Harder in Fort McMurray
Wildfire at the edge of town
In May 2016, almost 88,000 people were evacuated from the region and 1,958 structures were lost or damaged. Homes that stood still held smoke, ash and soot in walls, attics and ductwork, and that residue keeps causing odour and corrosion until it is professionally cleaned.
Smoke and ash in sealed, cold-climate homes
Houses built tight for winter trap smoke. Fine ash enters through vents and door gaps, settles in insulation and the HVAC system, and carries odour for months. Replace nothing until the contents and air system have been assessed, since much can be cleaned.
Heating-season house fires
Space heaters, fireplaces, cooking and electrical overloads can start house fires in a long Alberta winter. Firefighting water then adds a second loss, and in freezing weather an open, unheated house can also suffer frozen pipes. Fast board-up and heat protect what the fire left.
How We Handle Fire Damage Restoration in Fort McMurray
- You call (780) 762-0212 once the fire department releases the property. We dispatch a crew and secure the structure.
- We board up openings, tarp the roof, and remove standing water from firefighting.
- We assess soot type, smoke spread, and structural damage, and we document everything for your claim.
- We clean soot from surfaces and contents, treat odour with air scrubbers and deodorization, and dry wet materials.
- We remove what cannot be saved and rebuild with our own reconstruction crews.
For the national overview of this service, see Fire Damage Restoration.
Signs You Need Fire Damage Restoration, and What To Do First
- Visible soot on walls, ceilings, or window sills after any fire, even a small kitchen fire
- Smoke odour that lingers in closets, carpets, or ductwork
- Wet ceilings, floors, or a flooded basement after firefighting
- Discolored grout, fixtures, or appliances
- Broken windows, doors, or roof sections that leave the house open
- A musty smell in the days after the fire, which points to hidden moisture
Stay out until the fire department says the building is safe. Do not turn on the heating system or ceiling fans, which spread soot, and do not wipe soot with household cleaners, which can set the stain. Take photos, call your insurance carrier, and call (780) 762-0212 so we can secure the property and start the cleanup.
What Affects the Scope and Timeline
The scope depends on what burned, how far the smoke traveled, and how much water was used. Protein residue from a kitchen fire cleans differently from the dry soot of a paper or wood fire, and synthetic materials leave an oily residue that smears if it is handled wrong. We test surfaces before cleaning and write a room-by-room scope for your adjuster.
A small kitchen fire may take a few days of cleaning and deodorization. A larger fire with structural damage moves into demolition and reconstruction, which can take several weeks or more depending on materials and permits. We give you a schedule at each stage and update it as the work progresses.
What We Restore After a Fire
- Walls, ceilings, and framing
- Kitchens and cabinets
- HVAC systems and ductwork
- Flooring and subfloors
- Furniture, clothing, and textiles
- Electronics and documents
- Basements soaked during firefighting
- Attics and insulation
Insurance and Documentation for Fire Damage Restoration
We provide Direct Insurance Coordination on fire losses. That means photos, a written scope of work, contents inventories, and communication with your adjuster on your behalf, with billing handled for you. Coverage for structure, contents, and additional living expenses depends on your policy, so confirm the limits with your carrier early.
Why Property Owners Choose 911 Restoration for Fire Damage Restoration
24/7 Response, 45-Minute Typical Arrival
We answer every call at any hour, and our typical arrival is 45 minutes, so damage gets attention while it can still be contained.
IICRC-Certified Technicians
Trained crews with moisture meters, thermal imaging, and the containment and disinfection equipment each job requires.
Direct Insurance Coordination, No Subcontractors
One local team documents the loss, works with your adjuster, and handles the work from emergency response through reconstruction.
We provide this service in Timberlea, Thickwood, Downtown and the Lower Townsite, Eagle Ridge, Parsons Creek, Abasand, Beacon Hill, Gregoire, Waterways, Dickinsfield, Wood Buffalo, and Stone Creek.
Frequently Asked Fire Damage Restoration Questions in Fort McMurray
Can smoke and ash damage a home that did not burn?
What should I do after a wildfire evacuation order lifts?
How soon should fire cleanup begin?
Can smoke odour really be removed?
Does Alberta home insurance cover wildfire and smoke damage?
Related Services from 911 Restoration of Fort McMurray
This page is part of 911 Restoration of Fort McMurray. If your loss involves more than one problem, we also provide Water Damage Restoration, Reconstruction, and Sanitization Services, all handled by the same local team.
Contact 911 Restoration of Fort McMurray About Fire Damage Restoration
Soot and water keep working after the fire is out. Call us as soon as the property is released.